BOCI 3D D11 H19 M8 Single Nozzle for 3D Fiber Laser Cutting (10 pcs)

single-layer version of the d11 × h19 m8 nozzle for boci (bochu) 3d heads, built for clean nitrogen and air cuts on 3d parts. all available calibers are listed on this page; 1.0 mm is ideal for thin sheet and fine-kerf cutting.

size:

• nozzle body diameter: d11 mm
• nozzle height: h19 mm
• thread: m8

spec:

• nozzle type: single-layer cutting nozzle
• 1.0 / 1.2 mm caliber: thin sheet, narrow kerf and detailed parts
• 1.4 / 1.5 / 1.6 / 1.8 / 2.0 mm caliber: thin to medium sheet with higher gas flow
• 2.5 / 3.0 / 3.5 / 4.0 / 4.5 / 5.0 mm caliber: thicker material and higher throughput
• single-layer gas flow, typically used for nitrogen or air cutting of stainless steel and aluminium (always follow your machine's cutting tables)

material:

• cnc-turned alloy body with a polished orifice
• clean, symmetric gas jet thanks to a burr-free bore
• thread cut to tight tolerance for secure seating in the head

use:

• 3d cutting of stainless steel and aluminium with nitrogen or air
• trimming of deep-drawn and pressed parts
• tube and profile work on 3d cutting systems

compatibility:

• boci (bochu) 3d cutting heads using d11 / h19 / m8 single nozzles
• check the thread and height of your current nozzle before ordering
• brand and model names are used for compatibility reference only; this is a plasarf replacement part, not an original oem part

quality:

• caliber diameter verified against the marked size
• visual inspection for burrs and surface defects
• consistent geometry from batch to batch for predictable results