D15 H19 M8 Single Nozzle for 3D & Tube Laser Cutting (10 pcs)

single-layer d15 × h19 m8 nozzle for 3d and laser tube cutting, for clean nitrogen and air cuts on round, square and rectangular tubes. all available calibers are listed on this page; 1.0 mm suits thin-wall tubes and fine contours.

size:

• nozzle body diameter: d15 mm
• nozzle height: h19 mm
• thread: m8

spec:

• nozzle type: single-layer cutting nozzle
• 1.0 / 1.2 mm caliber: thin-wall tubes, narrow kerf and detailed parts
• 1.5 / 1.8 mm caliber: thin to medium wall thickness with higher gas flow
• 2.5 / 3.0 / 3.5 / 4.0 / 4.5 / 5.0 mm caliber: thicker walls and higher throughput
• single-layer gas flow, typically used for nitrogen or air cutting of stainless steel and aluminium (always follow your machine's cutting tables)

material:

• heat-resistant machined alloy body
• fine surface finish that resists spatter adhesion
• sharp, uniform orifice edge for stable gas flow

use:

• laser tube cutting of stainless steel and aluminium
• nitrogen or air cutting of thin-wall tubes
• profile and 3d cutting where the compact d15 body is needed

compatibility:

• 3d and tube cutting heads using d15 / h19 / m8 nozzles
• the d15 body is much smaller than standard d28 nozzles, so measure before ordering

quality:

• each nozzle checked for concentric caliber geometry
• consistent diameter and surface finish for repeatable cutting results
• protective packaging to prevent damage in transit