D28 H15 M11 Double Nozzle for Fiber Laser Cutting - Plasarf Original (10 pcs)

standard d28 double nozzle for precise fiber laser cutting. the d28 × h15 body with m11 thread fits the most common industrial cutting heads. all available calibers are listed on this page; 1.0 mm is ideal for thin sheet and fine-kerf cutting.

size:

• nozzle body diameter: d28 mm
• nozzle height: h15 mm
• thread: m11

spec:

• nozzle type: double-layer cutting nozzle
• 0.8 / 1.0 / 1.2 mm caliber: thin sheet, narrow kerf and detailed parts
• 1.4 / 1.5 / 1.6 / 1.8 / 2.0 mm caliber: thin to medium sheet with higher gas flow
• 2.5 / 3.0 / 3.5 / 4.0 / 4.5 / 5.0 mm caliber: thicker material and higher throughput
• double-layer gas flow, typically used for oxygen cutting of carbon steel (always follow your machine's cutting tables)

material:

• cnc-turned alloy body with a polished orifice
• clean, symmetric gas jet thanks to a burr-free bore
• thread cut to tight tolerance for secure seating in the head

use:

• fiber laser cutting of thin to thick carbon steel with oxygen
• applications where fine kerf and clean edges are required
• stable, repeatable piercing and cutting in daily production

compatibility:

• precitec, boci (bochu), bodor and similar heads using d28 / h15 / m11 double nozzles
• also used on head models such as bm114, bm06k, bs06k, bs08k and bs12k
• always confirm your original nozzle dimensions and required caliber before ordering
• brand and model names are used for compatibility reference only; this is a plasarf replacement part, not an original oem part

quality:

• caliber diameter verified against the marked size
• visual inspection for burrs and surface defects
• consistent geometry from batch to batch for predictable results